NETWORK I/O Remote I/O Systems:Function Remote I/O【95】

Converts 8 analog DC current inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 8 analog DC current inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts the digital data transmitted from the communication module into analog signals and provides a total of 8 DC voltage outputs.
Accuracy rating: +/-0.05% F.S.

Converts the digital data transmitted from the communication module into analog signals and provides a total of 4 DC voltage outputs.
Accuracy rating: +/-0.05% F.S.

Converts the digital data transmitted from the communication module into analog signals and provides a total of four 4-20mA outputs.
Accuracy rating: +/-0.05% F.S.

Converts 4 analog thermocouple inputs into digital signals and transmits the converted data to the communication module.
Data format: Integer of measured value (°C) x 10

Converts 8 analog RTD inputs into digital signals and transmits the converted data to the communication module.
Data format: Integer of measured value (°C) x 10

Powers a two-wire transmitter, converts eight 4-20mA inputs to digital signals, and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Powers a two-wire transmitter, converts eight 4-20mA inputs to digital signals, and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 4 analog AC current inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 4 analog AC voltage inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Chassis unit for mounting the power, communication, and I/O modules for the MRH-T series

Chassis unit for mounting the power, communication, and I/O modules for the MRH-T series

Chassis unit for mounting the power, communication, and I/O modules for the MRH-T series

Terminal block that provides connection between 40 MIL connector contacts and 40 M4 screw terminals.

Terminal block that provides connection between 40 MIL connector contacts and 40 M3.5 screw terminals.

Cable for connecting 40 MIL connector contacts of I/O modules and 40 MIL connector contacts in a terminal block.

Cable for connecting one 40-pin I/O module MIL connector to two 20-pin terminal block MIL connector.

This cable connects the M3 screw terminals of the IO module to the M4 screw terminals (4 pairs).

Cable with a connector on one end and a pair of M4 round terminals on the other end, for exciting I/O channels.

Cable with a connector on one end and four pairs of M4 round terminals on the other end, for exciting I/O channels.

Non-functional module used to fill unused slots in the chassis

Module functions include monitoring input and output values, changing output setting, saving Config. files, downloading files to systems, and snap-shotting all input and output data.

Software for data acquisition and display for the Alchis series. It enables you to see graphic, trend, and alarm data, to print reports, and to confirm the settings and status of your Alchis unit.

The 901MB provides 12 discrete (active-low) input channels and supports Modbus-RTU communication.

The 902MB provides 12 discrete (PNP) output channels and supports Modbus-RTU communication.

The 903MB provides 12 discrete I/O (active-low/PNP) channels and supports Modbus-RTU communication.

The 904MB provides 12 discrete (active-high) input channels and supports Modbus-RTU communication.

The 905MB provides 12 discrete (NPN) output channels and supports Modbus-RTU communication.

The 906MB provides 12 discrete I/O (active-high/NPN) channels and supports Modbus-RTU communication.