MS2900 SeriesBP2900
Chassis Mount Type
Dummy Module
SIGNAL CONDITIONERS Isolated Signal Conditioner MS2900 Series【23】
Chassis Mount Type Ultra-compact Signal Conditioners with Isolated Dual Output
Series model lists
- Isolated Signal Conditioner：Accessories：Dummy Modules
-
|
Non-functional module used to fill empty slots in the chassis |
|
5,500Yen |
6Days
|
3Years |
-
-
|
|
- Isolated Signal Conditioner：Accessories：Non-conditioning I/O Adapters
-
MS2900 SeriesMS2900-TH
Chassis Mount Type
Non-Conditioning I/O Adapter
|
I/O adapter that does not provide any signal conditioning. The front-accessible switch turns on or off the internal 250Ω shunt resistor. |
16,500Yen |
6Days
|
3Years |
-
-
|
Input1 to 5V DC, 4 to 20mA DC |
- Isolated Signal Conditioner：Temperature Transmitters：Thermocouple Temperature Transmitters
-
MS2900 SeriesMS2901
Chassis Mount Type
Thermocouple Temperature Transmitter
|
Converts thermocouple inputs into commonly used DC signals. |
38,500Yen |
6Days
|
3Years |
-
-
|
InputThermocouple types: K, E, J, T, B, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeApprox. 2Hz-3dB |
- Isolated Signal Conditioner：Temperature Transmitters：RTD Temperature Transmitters
-
MS2900 SeriesMS2902
Chassis Mount Type
RTD Temperature Transmitter
|
Converts RTD inputs into commonly used DC signals. |
33,000Yen |
6Days
|
3Years |
-
-
|
InputRTD: Pt 100Ω, JPt 100Ω, Ni 508.4Ω, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeApprox. 2Hz-3dB |
- Isolated Signal Conditioner：High-level Signal Conditioners：High-level Signal Conditioners (Isolators)
-
MS2900 SeriesMS2903
Chassis Mount Type
Millivolt Isolator
|
Converts millivolt signals from sensors or other devices into commonly used DC signals. |
27,500Yen |
6Days
|
3Years |
-
-
|
Input+/-10mV, +/-100mV, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeApprox. 2Hz-3dB |
- Isolated Signal Conditioner：High-level Signal Conditioners：High-level Signal Conditioners (Isolators)
-
MS2900 SeriesMS2904
Chassis Mount Type
High-Level Signal Conditioner (Isolator)
|
Converts DC current or voltage signals into commonly used DC signals. |
22,000Yen |
6Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 5V, 0 to 10V, +/-5V, +/-10V Output 21 to 5V, 0 to 5V, 0 to 10V, +/-5V, +/-10V, 4 to 20mA Response TimeApprox. 30Hz-3dB |
- Isolated Signal Conditioner：Alarm Setters：Alarm Setters
-
MS2900 SeriesMS2905
Chassis Mount Type
Alarm Setter (Alarm Unit)
|
Compares the levels of DC current or voltage signals with one set-point and outputs two independent isolated relay contact closure signals. |
38,500Yen |
6Days
|
3Years |
-
-
|
Input1 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Output 1Relay contact output (SPST independent single circuit) Response TimeApprox. 3ms |
- Isolated Signal Conditioner：Sensor Signal Conditioners：Strain Gauge Transmitters
-
MS2900 SeriesMS2906
Chassis Mount Type
Strain Gauge Transmitter
|
Supplies excitation voltage to strain-gauge type pressure sensors, load cells and the like and converts their output signals into commonly used DC signals. |
38,500Yen |
6Days
|
3Years |
-
-
|
InputSpan: 5 to 400mV; input range: -200 to 200mV; excitation voltage: 5V DC, and others Output 11 to 5V Output 24 to 20mA Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Distributors：Distributors
-
MS2900 SeriesMS2907
Chassis Mount Type
Distributor
|
Powers a two-wire transmitter and converts its 4 to 20mA signals into commonly used DC signals. This model can also be used as an isolator. |
27,500Yen |
6Days
|
3Years |
-
-
|
Input4 to 20mA from 2-wire transmitters (Transmitter power supply: 24V DC) Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeApprox. 30Hz-3dB |
- Isolated Signal Conditioner：Distributors：Distributors
-
MS2900 SeriesMS2907B
Chassis Mount Type
Distributor
|
Powers a two-wire transmitter and converts its 4 to 20mA signals into commonly used DC signals. |
27,500Yen |
6Days
|
3Years |
-
-
|
Input4 to 20mA from 2-wire transmitters (Transmitter power supply: 24V DC) Output 11 to 5V Output 24 to 20mA Response TimeApprox. 30Hz-3dB |
- Isolated Signal Conditioner：Frequency Converters：Frequency/Analog Converter
-
MS2900 SeriesMS2908
Chassis Mount Type
Frequency/Analog Converter
|
Converts pulse train signals from flow sensors and the like into commonly used DC signals. |
38,500Yen |
6Days
|
3Years |
-
-
|
InputOpen collector, DC voltage pulse, current pulse, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on input frequency. |
- Isolated Signal Conditioner：Frequency Converters：Pulse Shapers (Pulse Isolators)
-
MS2900 SeriesMS2909
Chassis Mount Type
Pulse Shaper (Pulse Isolator)
|
Accepts pulse train signals from sensors or other devices and shapes these pulses or converts signal levels as necessary. |
36,300Yen |
6Days
|
3Years |
-
-
|
InputOpen collector, DC voltage pulse, current pulse, and others Output 1TTL, open collector Output 2TTL, open collector Response TimeDependent on input frequency. |
- Isolated Signal Conditioner：Sensor Signal Conditioners：Potentiometer Transmitters
-
MS2900 SeriesMS2910
Chassis Mount Type
Potentiometer Transmitter
|
Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals. |
33,000Yen |
6Days
|
3Years |
-
-
|
InputBetween 0-100Ω and 0-10kΩ Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeApprox. 2Hz-3dB |
- Isolated Signal Conditioner：Function Modules：First-order Delay Signal Conditioners
-
MS2900 SeriesMS2916
Chassis Mount Type
First-Order Delay Signal Conditioner
|
Converts DC current or voltage signals into commonly used DC signals. |
38,500Yen |
6Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on the set value. |
- Isolated Signal Conditioner：Sensor Signal Conditioners：CT Transmitters
-
MS2900 SeriesMS2920
Chassis Mount Type
CT Transmitter (Rms Calculation)
|
Calculates the rms values of AC current signals from a CT and converts them into commonly used DC signals. |
36,300Yen |
6Days
|
3Years |
-
-
|
Input0 to 1A AC, 0 to 5A AC Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on the set value. |
- Isolated Signal Conditioner：Sensor Signal Conditioners：PT Transmitters
-
MS2900 SeriesMS2921
Chassis Mount Type
PT Transmitter (Rms Calculation)
|
Calculates the rms values of AC current signals from a PT and converts them into commonly used DC signals. |
36,300Yen |
6Days
|
3Years |
-
-
|
Input0 to 110V AC, 0 to 150V AC, 0 to 250V AC, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on the set value. |
- Isolated Signal Conditioner：Distributors：Distributors
-
MS2900 SeriesMS2937
Chassis Mount Type
Non-Isolation Distributor
|
Powers a two-wire transmitter and converts its 4 to 20mA signals into commonly used DC signals. |
27,500Yen |
6Days
|
3Years |
-
-
|
Input4 to 20mA from 2-wire transmitters (Transmitter power supply: 24V DC) Output 11 to 5V Response TimeDependent on input frequency. |
- Isolated Signal Conditioner：High-level Signal Conditioners：High-level Signal Conditioners (Isolators)
-
MS2900 SeriesMS2954
Chassis Mount Type
High-Level Signal Conditioner (Isolator)
|
Converts DC current or voltage signals into commonly used DC signals. |
22,000Yen |
6Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 5V, 0 to 10V Output 11 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeApprox. 30Hz-3dB |
- Isolated Signal Conditioner：Chassis：Chassis for MS2900
-
MS2900 SeriesRC2900-01TB-D1
Chassis Mount Type
Chassis (for 1 channel, 24V DC-powered, European Terminal Block)
|
Chassis for the MS2900 series signal conditioners |
5,500Yen |
6Days
|
3Years |
-
-
|
InputOutput 1 |
- Isolated Signal Conditioner：Chassis：Chassis for MS2900
-
MS2900 SeriesRC2900-04
Chassis Mount Type
Rack
|
Chassis for the MS2900 series signal conditioners |
22,000Yen / 31,900Yen |
6Days
|
3Years |
-
-
|
InputOutput 1 |
- Isolated Signal Conditioner：Chassis：Chassis for MS2900
-
MS2900 SeriesRC2900-08
Chassis Mount Type
Rack
|
Chassis for the MS2900 series signal conditioners |
27,500Yen / 37,400Yen |
6Days
|
3Years |
-
-
|
InputOutput 1 |
- Isolated Signal Conditioner：Chassis：Chassis for MS2900
-
MS2900 SeriesRC2900-16
Chassis Mount Type
Rack
|
Chassis for the MS2900 series signal conditioners |
38,500Yen / 48,400Yen |
6Days
|
3Years |
-
-
|
InputOutput 1 |
- Isolated Signal Conditioner：Chassis：Chassis for MS2900
-
MS2900 SeriesRS2900
Chassis Mount Type
Chassis (for 1 channel)
|
Chassis for the MS2900 series signal conditioners |
6,600Yen / 8,800Yen |
6Days
|
3Years |
-
-
|
InputOutput 1 |
- Overview
- Download
- Price
- Standard Lead Time
- Warranty Period
- Standards & Approvals / RoHS
- Power Supply
- Details
- Basic Information
- Compare
The MS2900 Series is a line of isolated signal conditioners for PC input/output.
- Ultra-compact size, yet maintaining high performance and high functionality
- Power line equipped with a fuse as standard
- Concentrated input and output via connectors, providing direct connection with PC
- Multiple module mounting to a chassis, achieving both improved work efficiency and high-density mounting
- Simple circuit configuration providing low power consumption and long-term stability
- Transformer isolation ensuring high accuracy and high reliability
*1 Products are warranted for years from the date of shipment.
| Warranty Period *1 | 3Years |
|---|---|
| Standard Lead Time | 6Days |
| Power Supply | Rating: 24V DC / 100 to 240V AC (Option) |
| Connection | Chassis mounting |