NETWORK I/O Remote I/O Systems:Function Remote I/O【76】

Isolates 24V DC input and supplies 24V DC power to mutiple modules in the same MRH-T system.

Remote I/O communication module to communicate with the host over Modbus/TCP

Remote I/O communication module to communicate with the host over CC-Link (Ver. 2)

Isolates 32 contact inputs and transmits the input status to the communication module.

Counts 16 pulse inputs and transmits the count value to the communication module.
Built-in input power

Isolates the digital data transmitted from the communication module and provides a total of 32 contact outputs.

Converts 16 analog DC voltage inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 8 analog DC voltage inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 16 analog DC votalge (millivolt) inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 8 analog DC voltage inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 16 analog DC current inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 16 analog DC current inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 8 analog DC current inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts the digital data transmitted from the communication module into analog signals and provides a total of 8 DC voltage outputs.
Accuracy rating: +/-0.05% F.S.

Converts the digital data transmitted from the communication module into analog signals and provides a total of 4 DC voltage outputs.
Accuracy rating: +/-0.05% F.S.

Converts the digital data transmitted from the communication module into analog signals and provides a total of four 4-20mA outputs.
Accuracy rating: +/-0.05% F.S.

Converts 4 analog thermocouple inputs into digital signals and transmits the converted data to the communication module.
Data format: Integer of measured value (°C) x 10

Converts 8 analog RTD inputs into digital signals and transmits the converted data to the communication module.
Data format: Integer of measured value (°C) x 10

Powers a two-wire transmitter, converts eight 4-20mA inputs to digital signals, and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Powers a two-wire transmitter, converts eight 4-20mA inputs to digital signals, and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 4 analog AC current inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Converts 4 analog AC voltage inputs into digital signals and transmits the converted data to the communication module.
Data format: 0 to 10000 counts

Chassis unit for mounting the power, communication, and I/O modules for the MRH-T series

Chassis unit for mounting the power, communication, and I/O modules for the MRH-T series

Chassis unit for mounting the power, communication, and I/O modules for the MRH-T series

Terminal block that provides connection between 40 MIL connector contacts and 40 M4 screw terminals.

Terminal block that provides connection between 40 MIL connector contacts and 40 M3.5 screw terminals.

Cable for connecting 40 MIL connector contacts of I/O modules and 40 MIL connector contacts in a terminal block.

Cable for connecting one 40-pin I/O module MIL connector to two 20-pin terminal block MIL connector.