MS3700 SeriesMS3714
Plug-in Type
Limiter
Plug-in Type
Limiter
-
-
|
7Years |
4Days
|
50,000Yen / 60,000Yen |
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between user-defined upper and lower limits. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time85ms max. |
Plug-in Type
First-Order Delay Signal Conditioner
-
-
|
7Years |
4Days
|
42,000Yen / 52,000Yen |
Adds a first-order delay to DC current or voltage signals and converts them into commonly used DC signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response TimeDependent on the set value. |
Plug-in Type
Filter Unit
-
RoHS6
|
7Years |
6Days
|
120,000Yen |
Filters voltage input signals with preset filter characteristics. |
Input+/-10V range Output 1+/-10V range Response TimeDependent on the set value. |
Plug-in Type
High/Low Signal Selector
-
RoHS6
|
7Years |
4Days
|
50,000Yen / 60,000Yen |
Selects the higher or lower of two input signals and converts it into commonly used DC signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time85ms max. |
Plug-in Type
Signal Selector
-
RoHS6
|
7Years |
4Days
|
60,000Yen |
Slim, plug-in signal selector that switches between two input signals by switching input. |
InputCurrent signal, current signal (shunt resistor 50Ω), voltage signal Output 1Equivalent to the input signal level, input signal x shunt resistor 50Ω, equivalent to the input signal level Response Time5ms max. |
Plug-in Type
Tacho-Generator Transmitter
-
RoHS6
|
7Years |
4Days
|
45,000Yen / 55,000Yen |
Converts voltage signals from a tacho-generator into commonly used DC signals. |
Input0 to 50mV, 0 to 1V, 0 to 200V AC, and others; input frequency: 15Hz to 1kHz Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time450ms max. |
Plug-in Type
Manual Setter
-
-
|
7Years |
4Days
|
60,000Yen / 70,000Yen |
Allows users to set a desired output value with the front-accessible switches. |
Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others |
Plug-in Type
Signal Reverser
-
-
|
7Years |
4Days
|
32,000Yen / 42,000Yen |
Converts DC current or voltage signals into DC signals inversely proportional to those signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time85ms max. |
Plug-in Type
Analog Memory
-
RoHS6
|
7Years |
4Days
|
47,000Yen |
Holds an output signal using external hold input. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time400ms max. |
Plug-in Type
Analog Memory (Multi-Function Model)
-
RoHS6
|
7Years |
4Days
|
57,000Yen |
Holds an output signal using external hold input. (with LED indicators) |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time400ms max. |
Plug-in Type
PWM Converter
-
RoHS6
|
7Years |
4Days
|
57,000Yen / 67,000Yen |
Converts DC current or voltage signals into PWM signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1TTL level, open collector, voltage pulse Output 2TTL level, open collector, voltage pulse Response Time1s max. |
Plug-in Type
High-Level Signal Conditioner (High Current Output Model)
-
RoHS6
|
7Years |
4Days
|
180,000Yen |
Converts DC current or voltage signals into high DC current signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1Specify within the range of -320 to 320mA. Response Time160ms max. |
Plug-in Type
Insulation Resistance Monitor
-
RoHS6
|
7Years |
4Days
|
96,000Yen |
Continuously monitors the insulation resistance of an inactive motor and indicates the insulation status at three levels: GOOD, ALARM, and FAILURE. |
InputAC 100/110V (50/60Hz), AC 200/220V (50/60Hz) Output 1Relay contacts (250V AC 1A, 24V DC 1A) Output Timer Time60 to 90s (fixed) |
|
Plug-in Type
Square-Root Extractor
-
RoHS6
|
7Years |
4Days
|
46,000Yen |
Extracts the square roots of DC current or voltage signals and converts them into commonly used DC signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time120ms max. |
Chassis Mount Type
First-Order Delay Signal Conditioner
-
-
|
7Years |
6Days
|
35,000Yen |
Converts DC current or voltage signals into commonly used DC signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on the set value. |
|
Chassis Mount Type
Filter Unit
-
RoHS6
|
7Years |
6Days
|
35,000Yen |
Filters input signals with preset low-pass filter characteristics. |
Input+/-10V range Output 1+/-10V range |
|
Chassis Mount Type
First-Order Delay Signal Conditioner
-
-
|
3Years |
6Days
|
35,000Yen |
Converts DC current or voltage signals into commonly used DC signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on the set value. |
|
Rack Mount Type
Square-Root Extractor
-
-
|
3Years |
45Days
|
50,000Yen / 70,000Yen |
Extracts the square roots of high-level DC input signals and converts them into two mutually isolated DC output signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V,and others Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
|
Rack Mount Type
High-Level Signal Conditioner with Limiter
-
-
|
3Years |
45Days
|
45,000Yen / 65,000Yen |
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between preset upper and lower limits. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 1V, 0 to 5V, 0 to 10V, 4 to 20mA, and others Output 21 to 5V, 0 to 1V, 0 to 5V, 0 to 10V, 4 to 20mA, and others Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
|
Rack Mount Type
First-Order Delay Signal Conditioner
-
-
|
3Years |
45Days
|
65,000Yen / 85,000Yen |
Converts high-level DC inputs into two mutually isolated first-order-delay DC outputs with an adjustable time constant between 0.2 and 20s. |
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time |
|
Rack Mount Type
Electromotive Force Generator
-
-
|
3Years |
45Days
|
59,000Yen |
Accepts standard process signals and provides millivolt signals proportional to the electromotive force of the thermocouple specified. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1Thermocouple types: K. E, J, T, B, and others Output 2None Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
|
Rack Mount Type
Current Sinker
-
-
|
3Years |
45Days
|
65,000Yen |
Accepts standard process signal and provides a 4 to 20mA current loop output using externally applied voltage. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA; sinking output Output 2None Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
|
Plug-in Type
Square-Root Extractor
-
-
|
3Years |
Please contact us
|
|
|
|
|
Plug-in Type
First-Order Delay Signal Conditioner
-
-
|
3Years |
Please contact us
|
|
|
|
|
Plug-in Type
Signal Selector
-
-
|
3Years |
Please contact us
|
|
|
|
|
Plug-in Type
Square-Root Extractor
-
-
|
3Years |
Please contact us
|
|
|
|
|
Chassis Mount Type
Square-Root Extractor
-
-
|
3Years |
45Days
|
50,000Yen |
Extracts the square roots of high-level DC input signals and converts them into commonly used DC signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 5V, 0 to 10V Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
|
Chassis Mount Type
First-Order Delay Signal Conditioner
-
-
|
3Years |
45Days
|
65,000Yen |
Converts DC current or voltage signals into commonly used DC signals. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 5V, 0 to 10V, +/-10V |
|
Chassis Mount Type
Electromotive Force Generator
-
-
|
3Years |
45Days
|
59,000Yen |
Accepts standard process signals and provides millivolt signals proportional to the electromotive force of the thermocouple specified. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1Thermocouple types: K, E, J, T, B, and others Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
|
Chassis Mount Type
Current Sinker
-
-
|
3Years |
45Days
|
65,000Yen |
Accepts standard process signal and provides a 4 to 20mA current loop output using externally applied voltage. |
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA; sinking output Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
|