Converts high DC voltage signals into DC voltage signals.

Converts thermocouple inputs into commonly used DC signals.

Converts thermocouple inputs into commonly used DC signals.
This model features a fast response time of 500μs or less (0 to 90%).

Converts RTD inputs into commonly used DC signals.

Converts 4-wire RTD inputs into commonly used DC signals.

Converts RTD inputs into commonly used DC signals. This model is intended for measurement of narrow temperature spans (e.g. Pt100Ω input span of 30 to 50°C)

Converts millivolt signals from sensors or other devices into commonly used DC signals.

Converts DC current or voltage signals into commonly used DC signals.

Converts DC current or voltage signals into commonly used DC signals. This model operates with 11 to 27V DC power supply.

Converts DC current or voltage signals into commonly used DC signals. This model features connection of output load resistance up to 1KΩ.

Converts 1 to 5V or 4 to 20mA DC signals into isolated 1 to 5V or 4 to 20mA DC signals.

Converts DC current or voltage signals into commonly used DC signals. This model operates with 24V AC power supply.

Built-in switches enable selection of input and output from either 1 to 5V or 4 to 20mA.

Converts DC current or voltage signals into commonly used DC signals. This model features separate adjustment of Output 1 and Output 2.

Compares the levels of DC current or voltage signals with two set-points (upper and lower limits) and outputs two independent isolated relay contact closure signals.

Compares the levels of DC current or voltage signals with two set-points (upper and lower limits) and outputs two independent isolated relay contact closure signals.

Compares the levels of DC current or voltage signals with two set-points (upper and lower limits) and outputs two independent isolated relay contact closure signals.

Supplies excitation voltage to strain-gauge type pressure sensors, load cells and the like and converts their output signals into commonly used DC signals.

Supplies excitation voltage to strain-gauge type pressure sensors, load cells and the like and converts their output signals into commonly used DC signals.

Powers a two-wire transmitter and converts its 4 to 20mA signals into commonly used DC signals.
This model can also be used as an isolator.

A wide span adjustment range allows the module to be used for level gauges with different ranges.

Powers a two-wire transmitter and converts its 4 to 20mA signals into 4 to 20mA signals. The module isolates bidirectional HART communication signals.

Converts pulse train signals from flow sensors and the like into commonly used DC signals.

Accepts pulse train signals from sensors or other devices and shapes these pulses or converts signal levels as necessary.

Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals.

Detects changes in the resistance of four-wire potentiometers and converts them into commonly used DC signals.

Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals. This model features providing constant current to the sensor.

Accepts pulse train signals from sensors or other devices, shapes or divides these pulses, and converts signal levels as necessary.

Accepts pulse train signals from sensors or other devices, shapes or divides these pulses, and converts signal levels as necessary.

Extracts the square roots of DC current or voltage signals and converts them into commonly used DC signals.